Webb Core, Inc. - Finishes

SPEC-STAT^®Product Performance
Static Dessipative Coating for Clean Room Environments

SPEC-STAT^®Coatings are:

Electrostatic Sissipative Coatings for applications to any substrate including ferrous and non-ferrous.
SPEC-STAT^® may be applied using spray or coil coating equipment.
Typical properties of SPEC-STAT^® Wall Coatings:


	Coating Type:		Epoxy
	Color:		No restrictions
	Gloss (60*):		70% maximum, No minimum
	Dry Film Thickness:		0.4 - 1.0 mils
	Pencil Hardness		2H (NCCA IT-12)
	Adhesion:		No paint removal (NCCA IT-5)
	Tabor Abrader:		<10mg (CS 10,1000 GM 100 Cycles)
	Surface Resistivity:		10 6 - 10 9 ohms/sq*
	Out-gassing:		0.2 PPM/mg of sample
	Elestrostatic Decay:		<10% IN, .5/sec. **

	* EOS/ESD-S11, 11-2993 Supercedes ASTM D257 ** Method 4066 Federal Test Method Standard 101B

The paint used shall be subject to the chemicals listed for the time indicated and shall meet or exceed the resistance criteria as specified.

Chemical	Strength	10'	1hr	3hr	5hr	8hr	24hr

Sulfuric Acid	50%	0	0	0	0	0	0
Nitric Acid	50%	0	0	1	1	2	3
Hydrofluoric Acid	50%	3	3	3	3	3	3
Ammonium Hydroxide	30%	0	0	0	0	0	0
Sodium Hydroxide	50%	0	0	0	0	1	2
Hydrogen Peroxide	30%	0	0	0	0	1	3
Xylene	100%	0	0	0	0	0	0

0 = No Attach 1 = Surface Slightly Whitened			2 = Slightly Whiter than 1 3 = Attacked - Blistering

1-800-697-8062
EMAIL US